Bearing units

A mounted bearing unit consists of a deep groove ball bearing and a housing of cast iron or other materials in various configurations. The self-contained bearing has a spherical outside diameter which matches the spherical bore of the housing. This provides a full self-alignment feature to compensate for shaft or housing misalignment.

Pillow Types:	UCP200  UKP200  UCPX00  UKPX00  UCP300  UKP300 This is the most popular unit and is universally used in all types of the transmission devices. UCP Type is fixed at the shaft in a simple and reliable manner by the two set screws. UKP Types is mounted at the shaft with the adapter.
	UCPA200 This type is very convenient, since they can be used even if operating space is restricted. It can be fitted with bolts from the underneath of the base.
	UCPH200 This type of pillow block is designed as pedestal with increasing the center height. It is especially applied to a fan or blower. The unit is comparable to UCP2 type under normal shock load. Life is prolonged and maintenance costs are lowered.
	UCPE200  UCCP200  UCIP200  UKIP200  UCIP300  UKIP300  UCLP200  UCAK200  UCSB200  UCPG200  UCPW200  UCTB200  UCASE200  UCSHE200  SBLLP200  SBPSD200
Flange Types:	UCF200  UKF200  UCFX00  UKFX00  UCF300  UKF300 This bearing unit is square in form and is designed to fix at the side of the machine by means of 4 sets of bolts. It is most extensively used as the flange type unit. The mounting method is either with the set screws (UCF Type) and with the adapter (UKF Type).
	UCFL200  UKFL200  UCFLX00  UKFLX00  UCFL300  UKFL300  UCFT200 This housing is rhombus in form and is mounted at the side of the machine by means of 2 bolts. This is useful in saving the space and weight. The set bolt pitch is the same with that of the square flange type (UCF Type), and is interchangeable each other. UCFL Type is set at the shaft by use of the set screws and UKFL Type by use of the adapter.
	UCFC200  UKFC200  UCFCX00  UKFCX00 This housing is round in form and equipped with spigot at the mounting face. Therefore, the mounting can be made free from the eccentricity and the exact positioning can be achieved. This is most suitably applied to the assembly where the precision assembling is required. UCFC Type is fixed with the set screws and UKFC Type is mounted with the adapter at the shaft.
	UCFS200  UKFS200  UCFS300  UKFS300 The housing is square in form and has spigot at the mounting face as UCFC Type. Accordingly, the exact positioning can be arranged, without the eccentricity. It is suitably applied to such a place where the heavy duty and high precision are required. The mounting to the shaft is made either by the set screws (UCFS Type) or the adapter (UKFS Type).
	UCFA200 Adjustable Flange Unit has a two-bolt base with one side adjustable, enabling distance from center of shaft to be varied. Regarding their efficiently, advantages and disadvantages, it is similar to UCF200 type with a four bolt base.
	UCFB200 This type Flange Unit is a versatile unit used on extension or hanger and designed for housing confined spaces which do not allow use of Pillow Block and Flange.
	HCFS200  UCFK200  UCCF200  HCFLU200  UCCFL200  HCCJTZ200  UCFCSX00  UCFCS200  UCFCF200  UCCFC200  UCME200  HCFE200  SBFTN200  SBFN200  SBLF200  SBTM200 SBFCT200  SBFW200  SBFX200  SACFTR200
Cartridge Types:	UCC200  UKC200  UCCX00  UKCX00  UCC300  UKC300 The outer diameter of this housing is determined of the cylinder which is subjected to the precision grinding. This unit can be used as the normal bearing, utilizing the automatic center alignment. It is widely used in the automatic center alignment. It is widely used in the place where the adjustment to the axial direction is needed or in the transmission shaft which is accompanied by the expansion and construction. UCC Type is set at the shaft by use of the set screws, and UKC Type by use of the adapter.
	UCLC200
Hanger Types:	UCECH200 A hanger bearing Unit is mounted on a frame work of a conveyor by means of screwed pipe. The housing is rigid but of the smallest possible size.
	UCHA200  UCHE200
Take-up Types:	UCT200  UKT200  UCTX00  UKTX00  UCT300  UKT300 The structure allows the free movement of the unit, due to the sliding slot at the side of the housing. This unit is most suitably used to the tension bearing for belt conveyor or to the place where the shaft distance must be adjusted. UCT Type is set at the shaft by use of the set screws and UKT Type by use of the adapter.
	UCCT200  UCST200  UCNST200  UCTH200
Pressed Housings:	SBPP200 These are types of which SB200 type with set screw bearings are assembled respectively into a two-piece pressed-steel housings. The housing is suitable for light duty applications, where providing normal Pillow Block are used.
	SBPF200  SBPFS200  SBPFT200 These are types which SB2 with set screw type Bearings are assembled respectively into two piece pressed-steel housings. They are widely used light and normal duty applications. For SBPFS2 Types, the bearing is covered by the steel plate and therefore the dust-proof property is outstanding.
	SBPFL200 This type Flange Units consist of two interchangeable pressed-steel housings in which SB2 type wide inner ring bearing is assembled. Easy to install, the PFL type Flange Units provide a low-cost power transmission units with moderate capacity for radial or thrust combined loads. The spherical outside diameter of the bearing's outer ring to provide initial self-alignment in any direction.
Thermo Plastic Units	MUCTBL200  MUCPPL200  MUCFBL200  MUCNFL200 MUCFPL200
Stainless Series	MUCP200  MUCF200  MUCFL200  MUCFB200  MUCT200 Stainless Series are used in the heavy conditions as the high temperature and corrosion. The bearings are pre lubricated with food-grade grease. This high-performance units provide the good results at various applications. The new lost wax casting housings have been re-designed to give a lighter and rounder design.
Clean Series	KP000  KFL000 Zinc alloy die casting housing is lightweight, anti corrosive and compact design. Inner ring and set screws of the bearing have anti corrosive plating.